MT6572_EMMC_alps_P20 pro_4_4_2_Hongyue_W106_V43_3G_P20_pro(2019_09_12_11_07)

 Action : Read Firmware.
 Selected 0-By CPU:ELBRUS
 Exe version: Avengers Box MTK 0.6.1
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM23)
 Boot mode: Preloader
 BBCHIP: 6572 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35585a4d42
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 1501004E35585A4D42 : 00000000000000
 EMMC UA SIZE: 0xe9000000   
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9880000       [3.649 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 Build ID: KOT49H
 Display ID: Hongyue_W106_V43_3G_P20_pro
 Version: 4.4.2
 Model: P20 pro
 Brand: alps
 Device: x6_v5_x50
 Manufacturer: alps
 Region: US
 Mediatek Version Release: Hongyue_W106_V43_3G_P20_pro
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0xc00000     
 Start processing MBR
 Reading:  BEGIN: 0xc00000         - LEN: 0x200         
 Start processing EBR1
 Reading:  BEGIN: 0xc80000         - LEN: 0x200         
 Start processing proinfo
 Reading:  BEGIN: 0xd00000         - LEN: 0x300000     
 Start processing nvram
 IMEI[1] from NVRAM: 35362409xxxxxxx
 IMEI[2] from NVRAM: 35362409xxxxxxx
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1500000        - LEN: 0xa00000     
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1f00000        - LEN: 0xa00000     
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3580000        - LEN: 0x40000       
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x4340000        - LEN: 0x32000000   
 Saved to : C:\Users\gsm mutlab\Documents\Android_MTK\firmware_backup\MT6572_EMMC_alps_P20 pro_4_4_2_Hongyue_W106_V43_3G_P20_pro(2019_09_12_11_07)
 Wait untill phone will start charging.
 [0]All done.