TA-1576 Nokia 130 (2023) Clone Flash File Tested 💯% ✅🆗+923044599020

While many variants of the Nokia 130 (2023) / TA-1576 Clone use , several clone boards are manufactured using MediaTek (MTK) CPU architecture—typically the MT6261 or similar low-cost MTK feature phone chips.

Flashing the MTK variant requires a completely different driver set and tool configuration compared to the SPD version to prevent white screen / LCD blank errors or total device death.

Firmware Profile (MTK Variant)

Device Model: TA-1576 (Nokia 130 2023 Clone / Copy)
Supported Chipset: MediaTek MTK (e.g., MT6261, MT6261D)
File Format: .bin or .scat
Status: 100% Tested & Verified
Fixes: Hang on logo, dead boot repair, contact service, automatic restart, and blank/white screen issues.

Compatible Flashing Tools

Because this is an MTK clone architecture, standard HMD firmware utilities cannot read or write to it. Use one of the following tools:

DFT Pro: Go to the MTK tab or generic feature phone options.
Miracle Box / Miracle Thunder: Select MTK Tab -> Choose Boot (e.g., 4th Boot or Auto Connect) -> Select Write.
CM2MTK (Infinity-Box): Select the base platform module matching your extracted chip specification.
SP Flash Tool / Flash Tool (Feature Phone Edition): If the firmware package includes a scatter or config descriptor file.

Step-by-Step Flashing Procedure

1. Preparation

Install the latest MTK USB VCOM Drivers or MediaTek Feature Phone Drivers on your PC.
Charge the device battery to at least 40%.
CRITICAL: Perform a Read Flash (Backup) of the phone's current firmware before writing the new one. Clone hardware revisions change constantly, and a local backup is your safety net.

2. Flashing Process

Open your servicing tool (e.g., Miracle Box, DFT Pro, or CM2).
Set the type interface to MTK.
Select Write and load your verified TA-1576 MTK Clone File (.bin).
Click Start / Write Flash in the software interface.
Turn off the mobile completely and re-insert the battery.
Press and hold the Boot Key. For this model variant, it is typically the Center/OK Button or the Call/Dial Button. (If it fails to connect, try plugging it in without holding any keys).
Connect the phone to the computer via a Micro-USB cable.
Once the tool detects the hardware port (MediaTek USB VCOM), release the key and let the progress bar run to 100% until it displays a "Write OK" or "Success" alert.

👉💬+923044599020
DOWNLOUD LINK FILE PAID